Transformer substations CTZ block, mobile, etc.

Complete transformer substations block

Complete transformer substations block stationary execution
Complete transformer substations with block capacity from 1000 to 16,000 kVA, voltage 35/6 (10) kV are designed for receiving, converting, distributing and transit of three-phase alternating current electricity with a frequency of 50 Hz. They are used for power supply of industrial, agricultural and other consumers. They are manufactured in climatic versions of U and UHL placement category 1.

Complete transformer substations transported on sleds block
Mobile complete transformer substations, block-type, transported on sleds, with a capacity from 2500 to 16000 kVA, with a voltage of 35/6(10) kV, are designed for receiving, converting and distributing AC electricity with a frequency of 50 G. They are manufactured for the needs of the national economy, power supply of oil drilling rigs, exploration drilling, land reclamation needs, etc. They are manufactured in climatic versions of the ear and EAR placement category 1.

Automated complete transformer substations transported on sleds, block
Automated complete block transformer substations transported on sleds (APKTPB), with a capacity of 2500...6300 kVA, with a higher voltage of 35 kV are designed for receiving, converting and distributing electrical energy of three-phase alternating current with a frequency of 50 Hz in power grids with an isolated neutral. APKTPB design allows them to be used for temporary power supply of mining facilities with the possibility of moving the substation. APKTPB are manufactured in the performance of UHL placement category 1 and are suitable for operation at ambient temperatures from plus 40 ° C to minus 60 ° C.

Complete transformer substations block stationary execution
Complete transformer substations with block capacity from 2500 to 63000 kVA, voltage 110/35/6 (10) kV are designed for receiving, converting and distributing electricity of three-phase alternating current with a frequency of 50 Hz. They are used for power supply of industrial, agricultural and other consumers. They are manufactured in climatic versions of the ear and EAR placement category 1.

• Block substations. Technical specifications.

Cabinets of complete distribution devices of the VM-1 series
Complete switchgears of the internal installation of the small-sized VM-1 series are designed for receiving and distributing electrical energy of three-phase alternating current with a frequency of 50-60 Hz, a voltage of 6-10 kV of systems with an isolated or grounded neutral through an arc -extinguishing reactor. They are installed in modular container-type buildings.

• Switchgear. Technical specifications.

Prefabricated single-sided service chambers of the CSR-205 series
The CSR-205 single-sided service assembly chambers are designed to complete switchgear with a voltage of b and 10 kV of three-phase alternating current with a frequency of 50 Hz of systems with an isolated or grounded neutral through an arc-extinguishing reactor. CSR-205 cameras internal installations have one-way maintenance.

• The cameras are prefabricated. Technical specifications.

Transformer substations for general industrial purposes

Complete transformer substations of internal installation
Complete transformer substations of KTP with automatic switches of the LBA series are designed for receiving, converting and distributing electrical energy of three-phase alternating current of industrial frequency 50 and 60 Hz in power supply networks of industrial enterprises and other facilities.

Complete transformer substations with emergency power inputs
Complete transformer substations with emergency power inputs of 0.4 kV (KTPA) with a capacity from 630 to 1600 kVA are intended for power supply to consumers of their own needs of gas pumping stations of main gas pipelines, for power supply of electric receivers of the first category and a special reliability group, with the exception of consumers of their own needs of nuclear power plants.

• Substations of general industrial purpose. Technical specifications.

Transformer substations of outdoor installation

Urban complete transformer substations
Substations complete one- and two-transformer urban outdoor installations in a metal shell with a capacity from 160 to 630 kVA are designed for power supply of industrial enterprises, pumping stations, municipal loads of cities. Full readiness to connect the substation is due to the complete supply of a power transformer and the presence of a pull-out panel with 0.4 kV load switches.

Urban complete transformer substations installed in premises
Complete one- and two-transformer urban substations installed in enclosed spaces, such as GKTP-P with a capacity of 160 to 630 kVA are designed for power supply of residential and public buildings and other communal facilities.

Distribution boards of one-way service
Switchboards of one-way service of the SCHO type are designed for operation in three-phase alternating current networks with a voltage of 0.4 kV and a frequency of 50 Hz. Transformer substations of GKTP-P are equipped with shields, and the shields can also be supplied separately. The panels use circuit breakers of types 1VA and ABS, switch-fuse blocks BPV, low-voltage disconnectors RE19-41, current transformers T-0.66.

Mobile complete transformer substations of outdoor installation
Mobile complete transformer substations of outdoor installation (PKTPN) with a capacity from 100 to 630 kVA are designed for receiving electricity with a voltage of 6-10 kV, converting and distributing electricity of three-phase alternating current with a voltage of 0.4 kV and a frequency of 50 Hz. The design, depending on the high voltage device, is pass-through (with UHF) or dead-end.

Mobile complete transformer substations for drilling rigs
Mobile complete transformer substations of outdoor installation for power supply of drilling rigs (PKTPNB) with a capacity of 1000 and 2500 kVA are designed for receiving electricity with a voltage of 6-10 kV, converting and distributing electricity of three-phase alternating current with a voltage of 0.69 kV and frequency 50 Hz.

Mobile complete transformer substations pillar
Complete transformer substations column (KTPs) with a capacity from 25 to 250 kVA with a higher voltage of 6 (10) kV are designed for receiving, converting and distributing electrical energy of three-phase alternating current of industrial frequency 50 G and for power supply of individual settlements and small industrial facilities.

Mobile complete transformer substations railway
Complete transformer railway substations (KTPZH) with a capacity of 25...250 kVA with a voltage of 27.5 / 0.4 kV are intended for power supply to linear consumers of railway stations, sidings, stopping points, crossings, linear-track buildings.

Mobile complete transformer substations single-phase mast
Complete single-phase mast transformer substations (KTPS) with a capacity from 4 to 10 kVA are manufactured in a general industrial design for installation on reinforced concrete and wooden anchor supports of power transmission lines with a voltage of 6 (10) kV. Substations are equipped with transformers of the OMP type. Designed for street lighting and power supply of single-phase electric receivers.

• Substations of outdoor installation. Technical specifications.

Catalog